Qlogic iSR6200, Руководство пользователя программного обеспечения

Страница: 119 / 210

6–Command Line Interface
set array
ISR654608-00 B 6-45
To apply an array-based license to a specific array in the CLI:
1. Open a miguser session using the following command:
miguser start -p migration
2. To apply a license, enter the following command:
set array
(see “set array” on page 6-43 )
3. At the prompt,
Do you want to apply array license (yes/no)
,
enter
yes
.
The following example shows the
set array
command.
iSR6200 <1> (miguser) #> set array
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Index WWPN, PortId Symbolic Name Target Type
----- --------------------------------- --------------- -----------
0 50:00:1f:e1:50:0a:e1:4c, 01-2b-00 HP HSV200-0 Unknown
1 50:00:1f:e1:50:0a:37:18, 01-24-00 HP HSV210-1 Unknown
2 50:06:01:69:41:e0:18:94, 01-2d-00 DGC RAID-2 Unknown
3 20:70:00:c0:ff:d5:9a:05, 01-0f-ef HP MSA2012fc-3 Unknown
Please select a Target Id from the list above ('q' to quit): 1
Symbolic Name (Max = 128 characters) [HP HSV210-1]
Target Type (1=SrcTarget, 2=DstTarget, 3=Src+Dest Target) [3 ] 1
Bandwidth for Migration (0=Array Bandwidth, 1-400 MBps ) [0 ]
Do you want to apply array license (yes/no) [No ] yes
All attribute values for that have been changed will now be saved.