Qlogic iSR6200, Руководство пользователя программного обеспечения

Страница: 172 / 210

8–Restrictions
Removing an Array After Completing Data Migration Jobs
8-2 ISR654608-00 B
To remove an array after completing data migration jobs:
1. On the iSR6200, remove the configuration from the LUNs associated with
the array being removed:
If the LUN is configured to a migration job, remove or acknowledge the
job.
If the LUN is masked to an initiator, remove the LUN mask.
2. On the switch, remove the configured zones containing iSR6200 Fibre
Channel ports and controller ports of the array.
3. Wait for up to 30 seconds to see the array in the offline state in the
show
array
command output (see “show array” on page 6-50 ).
4. If working on a dual-blade setup, repeat the preceding steps for the peer
blade. The array must be offline on both blades before it can be removed.
5. Remove the array using the
array rm
command (see “array rm” on
page 6-6 )