109
3. If the oil is below the brim of the filler hole,
·
·
add sufficient
oil of the recommended type to raise it to the correct
level.
Be sure no foreign material enters the final gear case.
4. Install the oil filler bolt, and then tighten it tothe specified
torque.
Tightening torque:
Final gear oil filler bolt:
23Nm(2.3m kgf, 16ft lbf)
2. Place the machine on a level surface.
3. Place a container under the final gear case to collect
the used oil.
①
②
Final gear case cover
Bolt ( 2)
Final gear oil replacement
1. Remove the final gear case cover by removing the
bolts.
USER'S MANUAL
Содержание RD400
