Qlink RD400, Руководство пользователя

Страница: 51 / 168

If the engine fails to start, release the start switch,
then push the start switch again. Pause a few seconds
before the next attempt. Each cranking should be
as short as possible to preserve battery energy. Do
not crank the engine more than 10 seconds on each
attempt.
If the battery is discharged, pull the recoil starter
to start the engine.
NOTE:
See the ngine break-in?section prior to operating the engine
for the first time. e
Starting a warm engine
To start a warm engine, refer to the
engine section. The starter (choke) should not be used.
The throttle should be opened slightly. starting a cold
Warming up
To get maximum engine life, always warm up the engine
before starting off. Never accelerate hard with a cold
engine! To see whether or not the engine is warm, check
if it responds to the throttle normally with the starter
(choke) turned off.
7 If the engine is started with the starter . (choke) in
position 1 , the starter (choke)should be returned to
position 2 to warm up the engine. If the engine is started
with the starter (choke) in position 2 , keep the starter
(choke) in this position to warm up theengine.
8 Continue warming up the engine until it idles smoothly
and return the starter (choke) to position 3 before riding.
.
45
USER'S MANUAL