Part number, Rev 2.x
Page 4
1.0
General Information
1.1
Introduction
Thank you for purchasing the QLA HC1000 Heater / Circulator. The HC1000 has been
precision engineered and designed to create the optimal testing conditions as described
in the monograph, and be compatible with all dissolution baths.
1.2
Safe Operation
The HC1000 Heater / Circulator has been designed to operate safely with any dissolution
machine. Guidelines for safety provided in this operating manual are to keep the
operator and unit safe during operation.
If the unit is used in a manner not specified by Quality Lab Accessories, the operator
and/or unit may be at risk. Please read the safety information provided and use the
HC1000 Heater / Circulator for its intended purpose only.
Please observe all relevant safety practices during the operation of this unit.
1.2.1
General Safety
Operation of the HC1000 Heater / Circulator involves aqueous liquids in
conjunction with a heating element and electrical components. Improper or
careless use of this unit may create shock, fire, or other hazards which may
cause serious injury to personnel or equipment. The disassembly of this unit
may present an unsafe operating environment.
1.2.2
Electrical Hazards
Electrical components used in the heater / circulator operate at dangerous
voltages. Improper use and/or contact with these electrical components can
cause death or serious injury.
Application of the wrong supply voltage, an improperly wired outlet, or the
absence of proper electrical grounding could create a hazardous environment for
the operator, and cause damage to the HC1000 Heater / Circulator. Be sure to
always use a three-wire outlet with a ground connection adequate to the load
output by the unit, and that complies with all local, state, and federal safety
regulations.
