Qimova chair | User manual
Version 1.11 | Page 27 af 43
Adjustment of the calf cushion
The leg rests are provided with
upholstered calf supports. The cushions
are constructed with wedges along the
side to achieve the greatest support. The
calf supports will automatically adjust to
the shinbone. The calf supports can be
adjusted by loosening the screw (A) as
shown. Place the calf support in the
desired position and tighten the screw.
Figure 17.
Figure 15
5.6
Armrests
All armrests have padded cushions in the same upholstery as the seat and backrest. The
cushions are constructed with wedges of foam along the sides in order to achieve the
highest possible stability for the arm. Other sorts of cushions can be supplied as extra
equipment.
Height adjustment of the armrests
The position of the armrest can be modified in height by loosening the screws on the side
of the backrest and loosening the screw on the vertical tube under the armrest. The height
can be adjusted in increments of 15 mm.
Width adjustment of the armrest
The position of the armrest can be modified in width by loosening the screws on the
backtube of the armrest and the screw under the seat. The width can be adjusted up to 40
mm.
Length adjustment of the armrests
The length of the armrest can be modified by loosening the screws on the horizontal C-
profile under the armrest.
Angle adjustment of the armrests
The angle of the armrest can be modified by loosening the screws (A) on the side of the
backrest. Move the armrest to the desired position and tighten the screws again.
