Qilive Q.6643, Руководство пользователя, Страница: 11 / 180

11
EN
4.2. LEVELLING FEET
To avoid vibration, the unit must be leveled.
If required, adjust the leveling screws to compensate for the uneven floor.
The front should be slightly higher than the rear to aid in door closing.
Leveling screws can be turned easily by tipping the cabinet slightly.
Turn the leveling screws counter-clockwise to lower the unit, clockwise to raise it.
Lower
Higher
Note: The picture above is for reference only. The actual configuration will depend on
the physical product or statement by the distributor.
4.3. LEVELLING DOORS
If the doors are not at the same height, the door can be adjusted with a pair of pliers.
Precautions before operation:
A. Ensure that the refrigerator is disconnected from the power supply.
B. Before adjusting the door, precautions shall be taken to prevent any personal injury.
Schematic diagram for levelling the door body:
Pliers
Ring fastener
Hinge
grommet
Lower hinge
1. Raise the lower door up to the level of the higher door;
2. Using a pair of pliers, insert the supplied ring fastener in the gap between the
hinge grommet and the lower hinge. The number of ring fasteners you will need to
insert depends on the size of the gap.
4.4. MOVING THE APPLIANCE
1. Remove all food from inside the appliance.
2. Pull the power plug out, insert and fix it into the power plug hook at the rear or on
top of the appliance.
3. Tape parts such as shelves and the door handle to prevent from falling off while
moving the appliance.