SQ Remote Power Management User’s Manual
____________________________________________________________
29
Addr
：
A/4F, 2# Building , No.401, Caobao Road , Shanghai ,China Zip
：
200233 Web
：
www.sq-catv.com
Fax
：
86-21-64858301 - 62401979 Tel
：
86-21-54973555 – 34140103 - 64957666 E-mail
：
•
Web Access:
Enable or disable web access to the system. Default to enable.
•
Telnet Access:
Enable or disable Telnet access to the system. Default to enable. Only one active Telnet
session is permissible.
•
Enable Telnet Anonymous User
Enable or disable an anonymous user’s access to Telnet port.
•
Control command via Emails:
Enable or disable this access method. When it is enabled, you need to make sure you also
have completed POP/SMTP server and email receiving and sending addresses. See
“TCP/IP Network Configuration” setup menu for detailed information how to setup email
accounts. Default to disable.
•
SNMP Agent Enabling:
Enable or disable SNMP agent on the system. If the system SNMP Agent is enabled, it
collects and stores management information and makes this information available to NMS
(Network Management System) using SNMP. Please see Section 2.5 for a list available MIB
objects that the system supports. Default to disable.
•
SNMP Trap Enabling:
Enable or disable Trap sending. If this option is enabled, Traps are sent if there is a power
reboot command execution on the system. Default to disable.
Note: you must enable the above
SNMP Agent
setting. Otherwise, enabling Trap setting will
not take effect.
•
SNMP Trap Receiver IP Address:
Enter Trap Monitoring receiver IP address.
•
SNMP Community String:
To specify SNMP MIB/Trap community string. The default string is “public”. This string is
used for public, private and Trap.
•
Current A and B Alarm Threshold:
To defined AC current draw alarm threshold. The unit is Amps.
•
Temperature Alarm Threshold:
To defined temperature draw alarm threshold. The unit is Centigrade.
