SQ Remote Power Management User’s Manual
____________________________________________________________
34
Addr
：
A/4F, 2# Building , No.401, Caobao Road , Shanghai ,China Zip
：
200233 Web
：
www.sq-catv.com
Fax
：
86-21-64858301 - 62401979 Tel
：
86-21-54973555 – 34140103 - 64957666 E-mail
：
5.9 More About TCP/IP Network Configuration
There are two methods to config network. One is DHCP, the other is using static IP address.
For these two methods, we provide following three options to config network:
• Obtain IP using DHCP
Get IP by DHCP.
Helpful Info:
use the command “ifconfig dhcp” to perform this function
• Fallback to static IP(if DHCP failed)
Define a static IP address. If DHCP failed, allow the system to use a static IP address.
Helpful Info:
use the command “ifconfig auto” to perform this function
• Using static Ip address
Do not use DHCP, directly use a static IP address for the system.
Helpful Info:
use the command “ifconfig static” to perform this function.
Caution:
•
If using a static IP address, after config ip, netmask and gateway, you must run command
“ifconfig static” to enable static IP address.
• If using DNS fuction(e.g. set pop3 server), you must set DNS server IP address manually.
