QEP 61900Q, Руководство пользователя

Страница: 12 / 32

12
For your safety, never connect plug to power source
receptacle until all assembly and adjustment steps
are complete, and you have read and understood
the safety instructions.
ASSeMBLING TILe SAW TO STAND (FIG. F)
•
Lift the saw body and place it on the stand, aligning
the four mounting grooves (1) of the bracket (2) on
the top of the stand.
• insert the four locking knobs through the hole
located on the base frame and the holes of the
brackets (2).
•
tighten the four locking knobs.
• Place the stand on a level surface. Loosen the
upper wing nuts (3) and turn the leveling pads (4)
clockwise or counter-clockwise to adjust the height
of the bent leg tube.
• Turn the stand adjustment knob (5) located on the
left front stand leg clockwise or counter-clockwise to
adjust the stand until all legs are contacting the floor.
NOTE:
Before using the saw, verify that the tile saw is
securely locked in position, and that the left front stand
adjustment knob (5) and two leveling pads (4) have
stabilized the tile saw.
FOLDING THe STAND (FIG. C, D, G)
read all instructions on the manual and labels
before operating the stand.
•
Lift the right side of tile saw slightly, raise the cover
plate on the right side of stand, pull the locking knob
right out as the release direction, and then move the
saw slowly close to the wheel (5). (fig. d)
•
rotate the hook to the stop screw to secure the legs
of the stand in position. (fig. c)
•
Rest the right side of the saw onto the floor.
•
fold the left side leg set (3) close to the base by
releasing the two left side locking levers (2) from the
slot B to the slot a.
•
fold the stand slowly downward as shown. (fig. G)
TrANSpOrTING THe SAW (FIG. C, G)
•
repeat the steps of 1 to 3 on the section “foLdinG
the Stand”.
•
unfold the left side leg set (3) by releasing the two
left side locking levers (2) from the slot B to the
slot c. (fig. c)
•
Move the saw to the desired location for operation
or store the saw in a dry environment by using the
left side leg set as handle.
WARNING
!
WARNING
!
1
2
5
front of Stand
1
1
FOLDING
TRANSPORTING
1
1
Fig. F
Fig. G
4
3