Multi-Pointer
Service Manual
Page 4 of 26
2 Safety Instructions Laser
Intended use of the instruments
The instrument emits a visible laser beam in order to carry out the following measuring tasks (depending on
instrument):
•
Setting up heights, horizontal and vertical planes, right angles,
•
plumbing points.
Safety instructions
Please follow up instructions given in operators manual. Study manual carefully before use of instrument.
•
Do not stare into beam or view directly with optical instruments.
•
Laser beam can lead to eye injury.
•
Do not aim laser beam at persons.
•
The laser plane should be set up above eye level of persons.
•
Use instrument for measuring jobs only.
•
Do not open instrument housing.
•
Repairs should be carried out by authorized workshops only.
•
Please contact your local dealer.
•
Do not remove warning labels or safety instructions.
•
Keep instrument away from children.
•
Do not use instrument in explosive environment.
Specific reasons for erroneous measuring results
•
Measurements through glass- or plastic windows;
•
Dirty laser emitting windows.
•
After instrument has been dropped or hit. Please check accuracy.
•
Large fluctuation of temperature:
•
if instrument will be used in cold areas after it has been stored in a warm area (or the other way
round) please wait some minutes before carrying out measurements.
Care and Cleaning
•
Please handle measuring instruments with care.
•
Clean with soft cloth only after any use. If necessary damp cloth with some water or pure alcohol. If
instrument
•
is wet clean and dry it carefully.
•
Pack it up only if it is perfectly dry.
•
Transport in original container / case only.
Laser classification
The instrument is a laser class 2 or 2M laser product. (please refer to technical data of each instrument)
according to IEC 60825-1:2001:11.
It is allowed to use it without further safety precautions.
Eye protection is normally secured by aversion responses and the blink reflex.