Multi-Pointer
Service Manual
Page 9 of 26
4.2 Main part Disassembly
(As shown in Fig. 4, Fig. 5, Fig. 6, Fig.7 and Fig. 8)
Fig. 4
Fig. 5
1. Cut off the connection between the power and the main circuit board module by
electric iron (5-2). Screw off two cross plate screws M2×8(5-1) by a screwdriver.
Take off the switch (see Fig.4)
2. Cut off the four connections between the instrument core and the main circuit board
module by electric iron. Screw of two cross sink screws M2×4(5-4) by a screwdriver.
Take off the main circuit board module (5-3) (see Fig.5)
Fig. 6
Fig. 7
3. Screw off two cross plate screws M2×8(5-7) and four cross plate screws M2.5×14(5-5)
by a cross screwdriver. Take out the core part (5-6) (see Fig.6).
4. Meanwhile take out the press ring (5-9) and two press springs (5-8) (see Fig.7).
