QED uPlay Stream, Руководство пользователя

Страница: 8 / 35

8
3.4 Rear panel
1.
DC in 5V connector:
Connect to the supplied AC adaptor.
2.
Reset (reboot) button:
Press this button with a pen or a
pin to reboot the uPlay Stream.
3. LAN indicator: This LED will turn on when the uPlay
Stream is connected to a router via an Ethernet cable.
4.
LAN port:
Connect to a router via an Ethernet cable.
5.
WPS button:
This button serves two functions:
• Press and hold the
WPS
button for 2 seconds, then
release the button for WPS function.
• Press and hold the
WPS
button for more than 8
seconds, then release the button for factory reset
function.
6. 3.5mm stereo audio output jack: Connect to an amplifier
or powered speakers.
3.5 Top panel LED indications
1.
Power LED:
This LED will turn on when the uPlay Stream
is powered on.
2.
WiFi activity LED:
This LED will turn on after power on. It
will blink when there is WiFi activity.
3. WiFi connection LED:
• LED off: No WiFi connection or connection error.
• LED blinking: WiFi connecting.
• LED on: WiFi connected.
1 2 3 4 5 6
1 2 3