background image

3

Standard Framed 

Cabinet

Front        Side

Front        Side

Front        Side

Frameless “Euro”

Cabinet*

Flush Framed 

Cabinet**

STEP 1 - Position the SureCatch™

The SureCatch™ can be positioned on either the right or left side of 

the drawer depending on preference. 

TIP: Try to position the latches in a similar location in all drawers for 

ease of operation. 

As screw heads may interfere with the adhesive installation, it’s 

important to find an area on the inside of the drawer without screw 

heads for the Mounting Plate to properly stick to.  In order to help 

determine this it helps to partly assemble the SureCatch™ Latch as 

follows to find a good location.

Know your cabinet type

There are three basic types of kitchen cabinets and the following 

drawings will help you determine which type you have.

The Standard Framed Cabinet is by far the most common type and if 

this is what you have, follow the 2-Step Installation below.

*Unfortunately, we currently do not have a solution for the 

Framesless “Euro” Cabinets or the Flush Framed Cabinets, but we 

are working on a solution for these.

Содержание Adhesive Magnet Lock













Отзывы: