6
2A - Measurement of 0”-3/4”
1. With the Magnet Lock still in the middle
position of the Mounting Plate from STEP 1 and
with the Perfect-Installation Tool still attached,
insert the Perfect Installation Tool into the
LEFT (A) slot of the SureCatch™ until it grips.
This will hold the Mounting Plate in the desired
position.
2. Slowly push the drawer in to verify that the
Mounting Plate hits on the
drawer box
. Then
open the drawer again.
3. Remove the adhesive protective liner on the
Mounting Plate. Slowly push the drawer in until
the Mounting Plate sticks to the
drawer box
.
4. Now reach in with your fingers and press
firmly on the Mounting Plate against the
drawer
box
for at least 30 seconds. Open drawer.
Remove the Perfect-Installation Tool. You’re
DONE!
2B - Measurement of 3/4”-2”
1. Remove the Magnet Lock from the Mounting
Plate and while holding Mounting Plate
VERTICALLY with the arrow pointing up,
re-insert the Magnet Lock into the Mounting
Plate from the top
and with the Perfect-
Installation Tool still attached.
1
1
2
2
3
3
4
4
1
1
