QDI P6I440LX/DP, Руководство пользователя

Страница: 16 / 45

MainBoard Connector
3 - 4
CONNECTOR FUNCTION
IDE1 Primary IDE Port
IDE2 Secondary IDE Port
FLOPPY Floppy Drive Port
PRINTER Parallel Port
UART1 COM1/COM2/COM3/COM4
UART2 COM2/COM3/COM4/COM1
USB1 First USB Port
USB2 Second USB Port
Keyboard For PS2 Keyboard
PS2 Mouse For PS2 Mouse
SLOT1, SLOT2 Slots for CPU1 and CPU2. When single CPU is needed,
you can select any one of the two slots to install the CPU,
while another slot is for GTC (GTL Terminator Card). It's
necessary to install GTC when single CPU mode is
selected.
LAN On-board LAN I/O Connector. The on-board LAN adapter
occupies PIRQB of the PCI interrupter.
AGP For AGP cards. Since the on-board LAN occupies PIRQB
of PCI interrupter, you must select PIRQA for AGP Card
to avoid the resource’s conflicting.
PCI1 A PCI slave device can be installed, such as VGA card
which does not need interrupter. A PCI master device also
can be installed which needs PCI interrupter, such as a
LAN adapter. If a master device is installed, PIRQA must
be selected and there's no AGP card available.
PCI2 For those PCI slave devices which do not need PCI
interrupter.
PCI3 For those PCI slave devices which do not need PCI
interrupter.
PCI4 It's the same as PCI1 except the PCI interrupter should be
set to PIRQD when a master device is installed. In most
cases, PCI4 combining with the RAID port slot is used for
RAID port card (See RAID port).
RAID port Turn this SCSI embedded Motherboard to be hardware
assist RAID ready by adding the Adaptec ARO-1130