QDI J6A, Руководство пользователя

Страница: 40 / 60

!"
Manual for J6A series
B. Using QFlash (Under Windows ):
1. Download the QFlash Utility from the Website (http://www.qdigrp.com) or get it
from QDI Driver CD.
2. Run QFlash program step by step,following the directions until complete it .
3. Reboot the system, you can see the new picture displayed on the screen.
NOTE:
If you require more parameters information concerning “CBLOGO.EXE”, please
refer to the online help. If you don’t prefer the logo displayed on the
screen during bootup, set the “Show Bootup Logo” option as Disabled in
CMOS Setup.
* We reserve the right of modifying the default full-logo of QDI without
further notification.
A. Using CBLOGO.EXE Utility (Under DOS ):
1.Copy “CBLOGO.EXE”and “AWDFLASH.EXE” from the directory \Utility located on
QDI Driver CD to your hard disk.
2. Get the BIOS file from “AWDFLASH.EXE” or Download the BIOS file from the
Website (http://www.qdigrp.com) and copy the BIOS file(xxxxxx.bin) to your hard
disk.
3. Boot the system into DOS environment, Put your favor picture into BIOS file by
“CBLOGO.EXE” command. For example: CBLOGO.EXE xxxxxx.bin myphoto.bmp
4. Flash the BIOS to motherboard by “AWDFLASH.EXE”. For example: AWDFLASH
xxxxxx.bin
The BIOS of the mainboard is contained inside the Flash ROM. Severe viruses such as
CIH virus are so dangerous that it may overwrite the BIOS of the mainboard. If the BIOS
has been damaged, the system will be unable to boot. We provide the following solution
which protects the system BIOS from being attacked by such viruses.
There are two choices which implements this function.
1. Set the jumper (JAV) as closed, the BIOS can not be overwritten.
2. Set the jumper (JAV) as opened, meanwhile set “Flash Write Protect” as Enabled in
CMOS Setup. In this way, the BIOS can not be overwritten, but the DMI information
can be updated.
BIOS-ProtectEasy BIOS-ProtectEasy
BIOS-ProtectEasy BIOS-ProtectEasy
BIOS-ProtectEasy
J6Aen.p65 02-7-29, 9:55 34