Appendix
37
Manual for J6A series
1.3 ACTIVE PAR
Function :
Implements multi-boot function by activating one of the partitions.
Limitation :
When no partition exists, this button is disabled.
Steps :
If therere two or more partitions, choose one of them by pressing F5 key.
Note :
After setting active partition, a letter A will be shown in front of this partition.
1.4 CREATE MIR
Function :
Adds mirror partition for the disk partition that has no mirror.
Limitation :
This function should be performed by order, for example, from partition 1 to
4. If no disk space remains or the last partition has its mirror partition already, this button
is disabled.
Steps :
After pressing the CREATE MIR button, use F5 key to choose the partiti to
create mirror. The partition of which the size is bigger than the left disk space will be
ignored.
1.5 DELETE MIR
Function :
Deletes the mirror partition.
Limitation :
If there is no mirror partition, this button is disabled. This function should be
performed in reverse order, for example, from partition 4 to 1.
Steps :
After pressing the DELETE MIR button, only the final mirror partition can be
deleted in order to keep the continuous disk space. If the warning message is confirmed,
the mirror partition will be deleted. By pressing N or ESC key, the system quits.
1.6 UNINST SFW
Function :
Uninstall RecoveryEasy.
Limitation :
None.
Steps :
After pressing the UNINST SFW button and the warning message is confirmed,
RecoveryEasy will be uninstalled. By answering N, the system quits.
Note :
After RecoveryEasy is uninstalled, all the mirror areas have been disconnected
with the relate partitions. If no partition is deleted or changed in size, or no other partition
is created, users have chance to Recover existing RecoveryEasy settings when next
time entering RecoveryEasy partition interface, meanwhile the password will be set as
default setting qdiqdi.
1.7 OTHERS
F12 :
Switches to Recovery User Interface.
ESC :
Exits from the Partition User Interface. If users made some mistakes, for example,
wrongly delete a partition, do not press the ESC key, press the reset button on your
system at once, in this way users can save their system.
J6Aen.p65
02-7-29, 9:55
37
