30
ENGLISH
Initial Configuration
Upgrade the Firmware
4.4
The switch firmware is continuously being upgraded to meet more networking demands. It is
recommended to upgrade the firmware to ensure that your switch has the latest firmware for optimum
performance.
NOTE:
Before upgrading process, please make sure your currently version on the switch.
For example, the switch running with version 5.4.x.x only supported upgrade to
v5.4.x.x. Please use correct firmware to upgrading.
Initialization Stage
4.4.1
Connect the TFTP server to the switch via the management port.
1.
Set the service port IP address using the following commands:
2.
Connect the console cable to the console port.
a.
On a terminal emulation program (such as Teraterm or HyperTerm), set the baud rate to
b.
115200 (115200, n, 8, 1).
When prompted for the username and password, input “admin” for the username and leave
c.
the password empty.
Set the service port IP address (in the example below, the service port IP address is set to
d.
192.168.2.1):
configure
serviceport protocol none
serviceport ip 192.168.2.1 255.255.255.0
exit
Set Service Port IP Screen
Figure 4-3:
