ENGLISH
23
Hardware Installation
The 4 SFP+ ports support 10-gigabit IEEE 802.3ae Ethernet for fiber mediums.
To install an SFP+ module, do the following:
Slide the SFP+ module into an SFP+ port.
1.
Connect SFP+ Module
Figure 3-9:
Push completely until the module locks into place.
2.
Repeat the above procedures to install additional SFP+ modules.
3.
The SFP+ port LED lights green when the network link is established.
NOTE:
SFP+ modules are not included in the package. Contact your dealer to purchase.
