28
ENGLISH
Initial Configuration
Set the service port IP address (in the example below, the service port IP address is set to
6.
192.168.2.1).
Configure
Serviceport protocol none
Serviceport ip 192.168.2.1 255.255.255.0 <gateway>
exit
Set Service Port IP Screen
Figure 4-2:
(Switch)
(Switch)
(Switch)
(Switch)
(Switch)
From this point, the IP address, subnet mask, and gateway of the switch has been set. On the
7.
command prompt, input “
exit
” to go back one level. The prompt changes to “
(Switch) #
”.
Input “
8.
show serviceport
” to display the network configurations of the switch.
Obtain IP Address by DHCP
4.2.2
By default, DHCP client is enabled. The Ethernet switch will automatically obtains the IP address,
subnet mask, and default gateway from the DHCP server.
