6
9919-211
Rev. 06082017
9.
Tighten rack mounts using 15/16” socket/wrench until bushing diameter expands to same as washer.
10.
Tighten your loosely installed steering linkage
11.
Evenly torque all eight K-Member bolts (4 upper mounting bolts (89 lb-ft) and 4 rear chassis bolts (72 lb-ft) to
the given specifications.
12.
Release engine support and realign the engine mounts. Torque to 50 lb-ft.
13.
Re-install the brake calipers and wheels.
14.
Now that your installation is complete, the first stop must be to a front-end alignment shop for alignment of
the vehicle.
Figure 5
