Q-tran FLEX Dome, Руководство по установке

Страница: 2 / 25

© 2020 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com Specification subject to change.
Rev-03-08-21
INSTALLATION
FLEX Light - FLEX Dome
NOTES:
• Field modifications must comply with Q-Tran’s installation methods otherwise warranty is null and void
Instructions for Light Cutting
Cautions
1. Place the light horizontally when cutting it.
2. Use only factory-recommended cutter.
3. Cut the light according to the following instructions. Incorrect operation will damage the light.
Cutting line
02
02
01
02
0
1
01
02
01
02
Don't cut slantingly
WARNING: The above mishandling will damage the light.
Cut the light only at printed cutting line
with printing mark face upwards
The cutting surface must be flush
and smooth.
Printing mark should be faced upwards
Cutting can only be made at the printed cutting line
Cutting Line
Printing Mark
Cutting Line
Printing Mark
Incorrect cutting may lead to water ingression
The
mi
n. c
utti
ng
len
gth
(Se
e a
s th
e fe
atu
re)
Cut
ting
line
Cutting line
02
02
01
02
0 1
01
02
01
02
Don't cut slantingly
WARNING: The above mishandling will damage the light.
Cut the light only at printed cutting line
with printing mark face upwards
The cutting surface must be flush
and smooth.
Printing mark should be faced upwards
Cutting can only be made at the printed cutting line
Cutting Line
Printing Mark
Cutting Line
Printing Mark
Incorrect cutting may lead to water ingression
The
mi
n. c
utti
ng
len
gth
(Se
e a
s th
e fe
atu
re)
Cut
ting
line
Cutting line
02
02
01
02
0
1
01
02
01
02
Don't cut slantingly
WARNING: The above mishandling will damage the light.
Cut the light only at printed cutting line
with printing mark face upwards
The cutting surface must be flush
and smooth.
Printing mark should be faced upwards
Cutting can only be made at the printed cutting line
Cutting Line
Printing Mark
Cutting Line
Printing Mark
Incorrect cutting may lead to water ingression
The
mi
n. c
utti
ng
len
gth
(Se
e a
s th
e fe
atu
re)
Cut
ting
line
Cutting line
02
02
01
02
0
1
01
02
01
02
Don't cut slantingly
WARNING: The above mishandling will damage the light.
Cut the light only at printed cutting line
with printing mark face upwards
The cutting surface must be flush
and smooth.
Printing mark should be faced upwards
Cutting can only be made at the printed cutting line
Cutting Line
Printing Mark
Cutting Line
Printing Mark
Incorrect cutting may lead to water ingression
The
mi
n. c
utti
ng
len
gth
(Se
e a
s th
e fe
atu
re)
Cut
ting
line