q-Tech OLT-QSW-9010, Руководство по настройке CLI

Страница: 75 / 101

User Manual
7. ACL service configuration 75
www.qtech.ru
ACL extend ipv4 <3000-3999> Make rules according to the
protocol
type
code
(ip|tcp|udp|gre|ipinip|icmp)
, source IP and mask, source
port, destination IP and mask,
and the destination port
number, dscp<0-63>
or
precedence<0-7> and
cos<0-15> field, analyze the
data packets accordingly.
ACL hybrid ipv4 <5000-5999> The Hybrid IPv4 pattern is a
hybrid mode of link and
extend IPv4
ACL link <4000-4999> According to Ethernet type
code
(ip|ipv6|arp|rarp|pppoe-
conurol|p ppoe-data, etc.),
VLAN ID, cos<0-7>, source
MAC and destination MAC
fields, rules are formulated to
analyze and process the data
packets accordingly.
ACL user <6000-6999> According to the string
content of the offset digit
after PS (packet start), the
packet is processed and
analyzed
accordingly. To
configure PS more than 12, an
additional 4 bytes need to be
added
to match the
corresponding string because
the length of the internal lltag
results.
ACL standard ipv6 <7000-7999> The rules can only be
formulated according to the
source IP and mask fields of
the IP V6 message, and the
packets
are analyzed
accordingly.