User Manual
1. GPON properties
19
www.qtech.ru
1.12.
View the current system CPU|PON Optics| switching chip|PON chip
temperature
OLT(config)# show environment temperature
Cpu Chip Temperture : 36 C
Pon Optics Temperture
: 33 C Switch Chip Temperture : 38 C
Pon Chip Temperture : 35 C
Note:
The OLT QSW-9010 can view the device temperature; does not support this command.
1.13.
CTC-enable
When this feature is enabled, OLT will follow the CTC standard, which defaults to "ITU" rules.
1.14.
Broadcast storm suppression
In order to prevent the broadcast storm, unknown unicast and multicast storm, by default the OLT
uplink port message suppression PPS value will be 100.
OLT(config)# interface xe1/1
OLT(config-xe1/1)# storm-control broadcast pps 100
OLT(config-xe1/1)# storm-control multicast pps 100
OLT(config-xe1/1)# storm-control unicast pps 100
1.15.
OLT Default Route Configuration
OLT(config)# ip route
OLT(config-ip-route)# ip route 0.0.0.0/0 10.1.1.1
OLT(config-ip-route)# exit
OLT(config)# show ip static-route
static ip route
-----------------------------
0.0.0.0/0 via 10.1.1.1
Содержание OLT-QSW-9010
Страница 1: ...USER MANUAL www qtech ru QSW 9010 CLI Configuration user manual QSW 9010 ...
Страница 23: ...User Manual 2 Basic service configuration 23 www qtech ru ...
Страница 71: ...User Manual 6 QoS service configuration 71 www qtech ru ...
Страница 96: ...User Manual 12 Port statistics and PM statistics 96 www qtech ru ...