background image

QSD2316L DVR User’s Manual 

49

 

4.2.2 

System time: 

Set the time. While the unit is recording users cannot change the time. When recording, click Adjust 

button, a security window will appear.

 

 

Live Configuration 

Click LIVE to enter live configuration shown as Fig 4.5 Live Configuration 

 

Fig 4.5 Live Configuration 

Here users can set name/time display, picture color and hide cameras. The following are the definitions of each 

option. 

Camera name: 

Set camera name. It can be a combination of numbers, letters and symbols. 

Show name: 

Display camera name in live view. 

Hide:

 Hide the picture in live. Unauthorized users cannot view the camera. But it still works in the background  

recording. 

Show time:

 Display time in live view. 

Dwell time:

 

Is available for both Sequence and SPOT simultaneously. This unit has 2 channels of video output, refer 

to 2.3.1 Rear Panel Interface. One is the main output, the other is a spot output. Users can set the display time of 
cameras in auto dwell and spot out. 

Содержание QSD2316L




















































































































Отзывы: