Part 5 – Accessing the DVR menus
By pressing panel or the Remote Control’s “Menu” button under the preview mode, a password input frame will
appear. Enter the correct password and the system menu will appear.
The system default administrator password is 88888888, and the default operator password is 88888888.
After entering the menu, the main menu windows will appear as shown:
After entering into the menu, the cursor will appear highlighting the first symbol. The cursor can be moved by the
panel or by the UP & DOWN direction key s on the Remote Control. To go to the menu of a certain symbol, use the
panel or the Remote Control’s “Menu” key.
Now you are in operational mode, and are looking at the MAIN MENU. Under each symbol there are sub menus.
Please refer to Sections 4.9 and 4.10 in the owner’s manual for the Menu Guide and accessing the different functions.
Part 6 – Setting up DVR to record
There are 3 modes for recording:
1. Manual recording: Push the RECORD button. It will record all the time until you stop it by pushing the RECORD
button again.
2. Motion Detection Recording: This will record only when there is a Motion in front of the camera.
3. Time Schedule Recording: Use this option to record during specific times.
To Set Up Motion Detection Recording:
Use the remote control and push MENU, the default password is 88888888 then follow the instructions below:
Use the Down arrow to get to the second button which is
the RECORD button and push MENU to enter.
Go to DETECT and push MENU to enter Motion setup
