In the Motion Setup screen, we need to setup CH 1
through 8 or whatever channel we want to enable motion
detection like in the above picture.
Then go to Detect Area and select SET ALL and push
MENU to enter the area and you will see an all screen
purple (right picture)
Then you need to push 0 (number 0) on remote control to
exit the area. And use LEFT Arrow to exit all the way out
of the menus.
The system will start recording when there is motion and a Blue Round ball will come up where a camera is
detecting motion.
To Set Up Schedule Recording:
Use the remote control and push MENU, the default password is 88888888 then follow the instructions below:
In this Menu, click the second icon (Record)
Go to Schedule and push Menu to enter
