14
15
QC818
Front Panel
ESC
FN
REC
SHIFT
ENTER
POWER
HDD
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
NET
QC818 NVR 8 Channels
1
2
7
8
9
10 11
13
12
14
3
4
6
5
Number
Item
Function
1
Channel
Status Lights
These lights will illuminate to indicate that a particular channel
is recording.
2
Status Lights
Net and HDD will illuminate if there are problems with the
network connection or hard drive, respectively. The power
light will illuminate when the NVR is powered up.
3
IR Sensor
Infrared Receiver for Remote Control
4
Directional
Buttons
Navigate through menus.
Change selections in pull down menus (Up/Down buttons)
Toggle settings (Up/Down buttons)
5
Enter Button
Viewing Mode: Go To Menu
In Menu: Acts as mouse click
6
Power Button
Puts NVR into Standby mode or wakes it up.
7
Directional
Play Buttons
Play back video forwards or backwards. Pressing the same
button a second time will pause the video.
8
Playback
Speed
Slow or speed up playback - 1/4 speed to 4x speed.
9
Frame
Playback
Move forward or backwards frame-by-frame through video.
Works when video is paused.
10
Shift Button
For use in Virtual Keyboard
11
Record Button Begins manual recording on all channels
12
Function
Button
Single Channel Viewing Mode: Opens Color Adjustment
Virtual Keyboard: Backspace function
13
Escape Button Exit any menu or current operation
14
USB Port
For use with flash drive when backing up or updating
firmware. Not for use with mouse.
If the user is logged out, pressing the
Enter
button will open the
Login
window. Pressing the
Function
button will open the
Virtual Keyboard
which can be navigated using the directional
buttons. Click
Enter
to enter a keystroke. Press the
Escape
button to close the
Virtual Key-
board
and then press the
Enter
button to submit your password.
VGA
DC 12V
VIDEO OUT
AUDIO
OUT
IN
RS232
DC 48V
A
9
1
10
2
11
3
12
4
13
5
14
6
15
7
16
8
B
NO
C
NO
C
NO
C
1
4
8
5
7
2
3
6
10 11 12
13
14
9
Rear Panel
Number
Item
Function
1
POE Power
Input
48V power input for the Power Over Ethernet (POE) block.
2
POE Block
Powers directly-connected cameras and receives video
images.
3
Video Out
BNC Connector to television
4
Audio Out
BNC Connector for audio output
5
RS232
Reserved for use by manufacturer.
6
Alarm Input
Connect up to 16 external alarm sensors to this block. The
top row of numbers is for the upper block.
7
PTZ and Alarm
Out
Connect up to 3 external alarms using the Normally Open
(NO) or Closed (C) port
Connect the data cables for a PTZ camera into the ports
labeled A and B to control it. “A” is positive (+) and “B” is
negative (-).
8
Power Switch
Turns NVR on or off. Use Shutdown menu function or front
panel power button before switching off.
9
USB
Connect the USB mouse to this port
10
Audio In
BNC input for audio feed from microphone
11
Network
Ethernet cable connection to network
12
HDMI Video
Out
To connect to an HD display
13
VGA Video Out To connect to a VGA monitor (19” or larger)
14
NVR Power
Input
Connect 12V DC power supply here
Your NVR comes with two power supplies. The 48V is exclusively for use in powering the POE
block while the 12V 5A supply is for the NVR itself. The plugs and receptacles are different to
aid in connecting the proper power supply. Do not force or alter these connectors.