Q-See QC818 Скачать руководство пользователя страница 19

36

37

NOTE!

 Motion Detection can also be set up in the Motion Events menu as 

described in 

Motion Video Loss and Camera Masking Detection

below. If you need the NVR to do more than just record motion events, then 
follow those instructions. You do not need to set up motion detection in both 
menus.

SCHEDULE

Channel

Period

Period 1

Period 2

Period 3

Period 4

Period 5

Period 6

PreRecord       sec.

      Record Type   Regular   MD    Alarm  MD/Alarm

Snapshot

Regular

Wed

1

4

00 :00         -24 :00

Holiday Setting

00 :00         -24 :00

00 :00         -24 :00

00 :00         -24 :00

00 :00         -24 :00

00 :00         -24 :00

Copy

Default

OK

Cancel

MD

Alarm

MD/Alarm

0           3             6              9            12            15           18           21         24

conf.copy2paste

OK

Cancel

1

All

2 3 4

PICTURE 3-20

You may set more than one type of recording to occur at the same time but it should be 
noted that when regular recording is selected, the NVR will be already be recording whether a 
Motion Detection event occurs or not.

Copy 

– This allows you to duplicate a 

channel’s setting and apply them to 
another channel. When you click on 
the 

Copy

 button the 

Copy2Paste

 

popup window will open allowing you 
to select which channel(s) you wish to 
apply the settings to.

Default

 – Returns your NVR’s recording 

settings to the factory default of 
recording all the time.

You must check the 

OK

 button to apply your settings. Right-clicking or hitting 

Cancel

 will 

leave your settings unchanged.

ALARM

The use of alarms with your DVR is covered in 

Chapter 6 Alarms

.

MOTION, VIDEO LOSS AND CAMERA MASKING DETECTION

The DVR can be programmed to alert the user - and take specific actions - when motion is 
detected, the NVR loses connection to a camera or someone is physically covering a camera.
The responses to these events are found in the 

Motion Event

 menu. Each channel can be 

individually configured to respond to each event as you chose, or you can give all cameras 
identical settings.
The upper portion of this window is for setting the type of event, whether it is activated, and 
specific parameters relating to event detection. The bottom portion of this window allows you 
to choose how the system will respond to these events.

MOTION EVENTS

Event Type
Enable
Region

Trigger Period

Alarm Out
Show Message         Alarm upload         Send Email
Record Channel
PTZ Activation
Tour
Snapshot
Buzzer

Hold Time
Alarm Continue

sec.

Channel

Sensitivity

Motion Detect

1

3

0

sec.

0

Rec. Continue

sec.

10

Select

Set

Copy

Save

Cancel

Select

1 2 3 4

1 2 3 4
1 2 3

1 2 3

4

5

5
5

6

6
6

7

7
7

8

8
8

Motion Detection

With the 

Event Type

 drop-down set to 

Motion Detect, you can configure your NVR 
to record when someone or something 
moves through a camera’s field of view. 
Please note that this is an alternate way to 
schedule motion detection to the method laid 
out in the previous pages. 

PICTURE 3-21

PICTURE 3-22

This menu offers further refinements including what actions the NVR will take when motion 
is detected. Such actions include having other cameras begin recording, how long they’ll 
continue to record and even whether cameras will take still image snapshots and e-mail them 
to selected addresses. You do not need to set up Motion Detection in both sections but the 
NVR will use the schedules from both menus to determine when to record Motion events.

Channel

 – You can select an individual channel to configure or select 

All 

to give all of 

your cameras the same settings. You must have set that channel to record motion 
detection in the 

Schedule

 menu as described in the previous section.

Region

 – Clicking the 

Region

 button will bring up a grid overlaying that camera’s view. 

By default, each “block” of the grid will have a 
red hue indicating that it is sensitive to motion 
detection. Clicking in a block will make it clear 
meaning that motion detection has been 
turned off for that area. Turning off motion 
detection in selected areas is useful for 
situations when there is frequent movement 
by inanimate objects such as flags or wind-
blown trees and this will reduce false alerts. 
You can click and drag the mouse to turn 
off multiple blocks at the same time and you 
can deactivate motion detection in multiple, 
separate, areas of the screen. 

To reactivate motion detection, simply repeat the process in the deactivated blocks and they 
will regain their red hue and detect motion as normal.
You cannot use Copy/Paste in 

Motion Detection

 because each channel will have a different 

display. Right-clicking will exit the screen and your settings will be saved. 

Sensitivity

 – The system supports six levels of sensitivity with Level 6 being the most sensitive.

Содержание QC818















































Отзывы: