
60
61
PICTURE 4-25
PICTURE 4-26
4.5 REMOTE DEVICE
While cameras connected directly to the NVR through the POE ports will automatically
connect and display video, remote cameras connected to your system must be located
and added manually. This can be done through the process described in
Section 2.4 IP
Cameras
at the beginning of this manual or through the
Remote Device
window.
Use of remote devices requires that your NVR is connected to a router. These devices can
be IP cameras or even QC-series DVRs. If you intend to connect to devices that are located
outside of your local network, then this router must be able to access the Internet. Instructions
for connecting your system to the Internet are presented in the
Remote Monitoring Guide
that also came on the CD with your system. It is also available from our online resource at
www.Q-See.com/Support
.
Similarly, the remote devices must be able to communicate with the local network or Internet.
This will be covered in
Chapter 4
of the
Remote Monitoring Guide
as well.
This window can be reached by clicking on
the
Remote Device
icon in the
Main
menu...
MAIN MENU
SEARCH
INFO
ADVANCED
BACKUP
REMOTE DEVICE
SHUTDOWN
SETTING
RECORD SETTINGS
...or through the
Shortcut
menu by right-
clicking on the screen and selecting
Remote
Device
.
View 1
View 4
View 8
View 9
View 16
Pan/Tilt/Zoom
Auto Focus
Color Setting
Search
Record Status
Tour Setup
Remote Device
Alarm Output
Main Menu
PICTURE 4-27
REMOTE DEVICE
Show Filter
None
Delete
Manual Add
IP Search
Add
OK
Cancel
4
IP Address
Port
Device ID
Manufacturer
Type
1
10.1.1.65
Port 1
YZC2OC061966
Private
IPC
2
10.1.1.67
Port 2
YZCAU192012
Private
IPC
3
10.1.1.68
Port 4
TC2FW25600095
Private
IPC
4
196.219.8.50 4000
Private
channel Edit Delete
IPC Config
Status
IP Address
Port
Device ID
1
196.610.6.46 37777
2
10.1.1.67
Port 2 YZCAU192012
3
10.1.1.68
Port 4 TC2FW25600095
4
10.1.1.65
Port 1 YZC2OC061966
Device Added
When the window opens, you will be presented with a list of all connected devices in the
lower portion. This section, marked Device Added, indicates the status of each device along
with other information about it.
Icon
Meaning
Description
Editable
You may edit the settings on this device by double-clicking on it
Cannot
Delete
This device is connected directly to the NVR and must be physically
unplugged to be removed from this list.
Removable
This device may be deleted from the list by checking the box next
to it and clicking on the
Delete
button below.
Configure
IP Camera
Clicking on this icon will allow you to configure the video from this
camera.
Device
Status OK
The connected device is operating normally.
Device
Error
There is an issue with the connected device that is preventing it
from operating normally.
Clicking on
IP Search
under the upper portion of the window will generate a list of all devices
that the NVR was able to locate - both directly connected as well as connected to the same
network as your system. Items showing a short IP address beginning with “10” are cameras
directly connected to the NVR and who’s IP addresses were assigned by the NVR itself. Care
should be taken that you do not attempt to connect a device that is already connected to the
system as it will create a duplicate video feed and could cause connectivity issues.