Q-See QC818 Скачать руководство пользователя страница 34

66

67

No changes will take place unless the Execute button is pressed once you’ve made your 
selection. The drive’s status will be displayed next to the Type heading below the pull-downs. 
If you make changes and press 

Execute

, the NVR will restart once you press 

OK

 to exit. You 

cannot right-click out of the menu.

ERROR ALERTS

Event Type

Enable

Show Message      Alarm upload       Send Email

Buzzer

No Disk

Save

Cancel

Event type

 – Chose from No Disk, Disk Error, 

Disk No Space, Net Disconnected 
and IP Conflict. 

Show Message

 – When enabled, this will 

display the event notification on the 
NVR’s screen.

Alarm Upload

 – This feature is not available 

on this model.

PICTURE 4-34

Send E-mail

 – this will send an e-mail notification to the recipient address set up in the 

Network

 menu (see

 Section 1.2 Advanced Network Setup

 in the 

Remote 

Monitoring Guide

).

CAUTION!

 

Reformatting the hard drive will erase all recorded events.

The next section of the HDD Info window allows you to set any installed hard drives to one of 

four states:

Read/Write

Normal operation. The device records (writes) files to disk and plays (reads) 
them.

Read Only

No more files can be recorded onto the drive, but existing files can be viewed.

Format

Reformats the hard drive.

Recover

If you are having problems with the hard drive, including corrupted files, 
selecting Recover causes the drive to re-set, but does not erase its contents.

ERROR ALERTS

This window allows you to set up alarms for disk and system disconnection errors as well as 
how these alarms are handled. Each type of alarm can be independently enabled along with 
what events that type of alarm will trigger.

ACCOUNT

This is the account management window which allows you to add or delete users, create user 
groups, modify the access privileges of users, and create or change passwords.

 There are two pre-configured default 
users; Admin, and 666666. Only Admin has 
administrator rights. 
When adding a user, you not only create their 
user name and password, but you can grant 
or deny control over specific activities on the 
NVR, including which cameras that user can 
view or play back. These privileges can be 
changed later by an administrator-level user 
using the 

Modify User

 button. Administrator 

Users have control over 60 different functions 
while basic Users have 35 functions that can 
be allowed or denied.

PICTURE 4-35

PICTURE 4-36

A user or group name can consist of at most eight characters and no two users may have the 
same user name. There is no limit to the number of users or groups. 
The 

Memo

 field allows you to include a note about the user or group that is only visible in this 

window.
Toggling the 

Reusable

 box allows more than one user to log in using this account

Creating a group gives you the ability to set the access privileges for as many users and any 
users’ rights cannot exceed that of the group they are in.
Selecting 

Modify Password

 opens a new window which allows you to select the user whose 

password you want to change. Enter the old password and then the new password twice.

AUTO MAINTENANCE 

Much like a regular computer, this NVR 
benefits from being restarted after extended 
periods of operation. 
You can determine when the system will 
automatically reboot and you can optionally 
have it auto-delete old files at that time as 
well. You can set this option to delete files 
that are 1-31 days old.

Содержание QC818















































Отзывы: