background image

12

13

INSTALLATION AND OPERATION MANUAL SOLAR MODULES GENERATION 4 (G4.1) – HANWHA Q CELLS AUSTRALIA PTY LTD – EN

INSTALLATION AND OPERATION MANUAL SOLAR MODULES GENERATION 4 (G4.1) – HANWHA Q CELLS AUSTRALIA PTY LTD – EN

13

12

DANGER

! Risk of fatal injury due to electric 

shock! 

 

Ä

Block off the installation zone.

 

Ä

Keep children and unauthorized 
individuals away from the solar power 
system.

DANGER

! Risk of fatal injury due to electric 

shock! 

 

Ä

Ensure that modules and tools are not 
subject to moisture or rain at any time 
during installation.

WARNING

! Risk of injury due to falling mod-

ules!  

 

Ä

Secure modules during installation. 

 

Ä

Do not install modules in windy or wet 
weather. 

DANGER

! Risk of fatal injury due to electric 

shock! 

 

Ä

Only use dry, insulated tools. 

 

Ä

Do not carry out the installation alone.

• 

Only install undamaged modules and  
components.

 

Ä

Do not modify the module (e.g. do not 
drill any additional holes).

3.2  Preparation of installation

3 INSTALLATION

 

Ä

Maintain an interval of at least 10 mm 
between two modules.

10mm

10mm

Option 2:

 

Ä

Install the module at the 4 mounting 
points, see p. 7.

 

Ä

Tighten clamps according to  
manufacturer’s instructions.

NOTE

! Module damage may occur!

 

Ä

Do not subject modules to mechanical 
tension. Max. torsion 10 mm/m.

Option 3:

 

Ä

Install the module using mounting 
profiles, see p. 7.

Option 1:

 

Ä

Fasten the module with 4 clamps  
in the specified clamping range,  
see p. 7

 

Ä

Tighten clamps according to  
manufacturer’s instructions.

3.3  Module installation

3 INSTALLATION

Содержание Q.PRO-G4.1












Отзывы: