1
Introduction
The Pyxis LSP Series sensor is a pressure-based, submersible, level sensor. It provides continuous level
measurement up to 393 inch (32.8 ft or 10 m) with a 4-20mA analog and Bluetooth digital output. It can be
configured via the Pyxis’s
uPyxis®
Mobile App or
uPyxis®
Desktop App. The sensor can be powered by 4 AA
Li/SOCl
2
batteries or a 24 VDC external power supply. This battery-powered and Bluetooth-enabled level
sensor is ideally suited for applications where signal/power wiring may be difficult or unavailable to install.
A 1.3-inch OLED display and four push-buttons are also included in the sensor for display and setup. The
base product of the series, the LSP-100, is well suited for water, waste water, oil, and other non-corrosive
liquid. Other sensors in the LSP Series are available and suited for more corrosive liquids. See Figure 1
below on alternative units with compatible materials of construction.
Figure 1.
LSP Series User Manual
| +1 (866) 203-8397
2