Power Button
:
• Power On: Hold the power button for 1 second
• Power Off: Hold the power button until OLED display is turned off
• Display Wakeup: Hold the power button for 1 to relight OLED display (Only the power button has this
function)
Working Mode Button
: This button cycles through the different measurement intervals pre-programmed
into the LSP Series sensor. The current measurement interval is displayed on the top-right corner of the
OLED screen:
• CONT: Continuous measuring
• 10s: Measurement every 10 seconds
• 30s: Measurement every 30 seconds
• 3m: Measurement every 3 minutes
• 30m: Measurement every 30 minutes
• 1h: Measurement every 60 minutes
• STOP: Stop measuring
Other measurement intervals can also be configured on the
uPyxis®
App.
Display Mode Button
: This button cycles through four display modes and two system information
modes. For more details, see the
section of this manual.
Bluetooth Mode Button
: This button cycles through three Bluetooth modes:
• B: Beacon mode, allows multiple Bluetooth-enabled devices to read the LSP Series sensor’s broad-
casting results at the same time.
• P: Peripheral mode, used for sensor configuration and data download only. The LSP Series sensor can
only pair with a single Bluetooth-enabled device while in this mode.
• Absence of
: Shutdown mode, disables Bluetooth communication with the LSP Series sensor.
LSP Series User Manual
| +1 (866) 203-8397
8