90
Here the
Auto-Mode Sample Interval (s)
can be adjusted, defining
the time interval between consecutive measurements in the auto-
mode. As an advanced feature, the option
Enable Data
Transmission
activates digital data transmission via the UART
interface of the extension port (details on request).
NOTE:
Only sensors (e.g. oxygen channel 1-4, temperature,
pressure, humidity) which are activated in the
Pyro Oxygen Logger
software will be also measured during the auto-mode. If e.g. the
humidity sensor should measure during the auto-mode, the
respective
Activate
button in the
Settings
window must be
enabled.
