48
If it is incorrect, click on Set
Device Time. This opens a
window for adjusting the device
time. Clicking on Synchronize
will set it to the PC Time.
Alternatively the time and date
can be adjusted manually. For
this, edit the time and date
below "Set Manually", and click
on Set.
(2) Logging Mode. Select the
Logging Mode as Manual or
Continuous. In the Manual logging mode the user has to trigger
the logging for each single data point. Go on with step (5). In the
Continuous logging mode the device will automatically log data
points in defined time intervals.
(3) Logging Interval
(only for continuous mode)
. Select the
sampling Interval used during the logging as
1 s, 2 s, 5 s, 10 s, 30 s,
1 min, 2 min, 5 min, 10 min, 30 min, 1 h, 2 h or 4 h. It is advised to
choose this interval not unnecessarily too small, in order to
increase the battery run time, and to avoid too large log files.
(4) Logging Duration (only for continuous mode). The logging
Duration can be set to 1 min, 2 min, 5 min, 10 min, 30 min, 1 h, 2 h,
6 h, 12 h, 1 d, 2 d, 4 d, 1 week, 2 weeks, 1 month, 3 months, 6
months, 1 year or to Non-Stop.
(5) Comment. Enter optionally a Comment, which will be saved in
the header of the log file as soon the logging is started.
(6) Start Logging. Click now on Start which opens a separate
window Name Logging File.
This window displays the log files
saved in the device memory, including Date and Time, the Log
Name, the Size (in kB), as well as the total number of Log Files and
