13
Keep the three little air inlets of the air sensor clean and dry in
order to assure a proper operation of this sensor. Do not cover
these air holes during the measurements.
3.1.5
Power Button and Recharging the Battery
The
FireStingGO
2
is switched on and off by pressing the right
button for ca. 1 second (OK button). Note, that the device cannot
be switched off, while the device is logging data or while it is in the
PC mode (see below).
If the device does not switch on by pressing the OK button, the
integrated battery needs to be recharged. For this, connect the
USB port of the
FireStingGO
2
to any standard micro USB charger
or to any available computer USB port (with the included USB
cable). Typically the battery is fully recharged within ca. 2 hours.
3.2
Stand Clamp
The
FireStingGO2
can be optionally mounted on common lab
stands with the included stand clamp. For this, remove the red
silicone shell from the device and mount the stand clamp as shown
in the image.
