Copyright Pyroban Ltd. Issue 1 Page 18 of 32
Part number PM1083ENG
(d) NOTE: Erroneous flammable indications and
shutdowns may be seen if the gas head is
located next to axle vents or screen wash
containers.
(e) Gas Sensing Heads must be protected when
cleaning the vehicle or using silicone based
lubricants or sealants (A plastic bag sealed
with tape is sufficient). Where such materials
are present in the environment the Pellistor
Gas Sensing Head will not be covered by
Pyroban warranty protection.
Test Gas Cylinder
1. Position the gas bottle where the pressure gauge is visible
and where the vehicle provides mechanical protection.
2. Position the Gas Bottle Mounting Clamps onto the
Bracket. Secure the bracket with two M8 screws, spring
washers, plain washers and nuts supplied. Alternatively
drill and tap mounting holes in suitable location using
bracket as template.
3. Fit the regulator to the cylinder.
4. Fit the test gas cylinder assembly to the bracket and
secure with clamps provided.