AUTO TOTALING TIME CLOCK INSTRUCTIONS
Model 4000Pro/5000
+
/5000
+
HD
DESKTOP SET UP
WALL MOUNTING
PROGRAMMING
Remove time clock from carton & place on a flat, level surface.
Plug unit into AC wall outlet.
Select a location convenient to employees
clocking IN & OUT. Be sure power outlet is
within 5 feet of mounting location.
Use masking tape to hold mounting template
on wall, making certain template is positioned
so bottom of time clock is approximately
45 inches from floor.
Drill holes using template as a guide.
Remove template from wall & install #10 screws,
leaving approximately 3/16 inch of screws
exposed. For sheetrock walls, use plastic
anchors.
Hang time clock on wall, aligning keyholes on the
rear with screw heads. Press downward on time
clock until it lowers onto screws. If mounting
5000+HD Time Clock, unlock & remove top/front
cover, & tighten wall screws to fasten.
Plug unit into AC wall outlet.
Use key to unlock & remove top/front cover. Locate programming buttons
labeled SELECT,
s
(UP) &
t
(DOWN).
Press SELECT until desired feature is displayed (see chart on page 5).
Press
s
(UP) or
t
(DOWN) to scroll through feature options.
Press SELECT to save option setting & move to next feature.
2
2
3
4
5
6
1
1
2
3
4
1
Model 5000
+
Model 5000
+HD
4
INSTALLATION & PROGRAMMING
888.479.7264