27
Others
Safety
As the laser beam used in this unit is harmful to the eyes, do not attempt to
disassemble the unit. Refer servicing to qualified personnel only.
Should any solid object or liquid fall into the cabinet, unplug the player and
have it checked by qualified personnel before operating it any further.
Placement
Place the player in a location with adequate ventilation to prevent heat
build-up in the player.
Do not place the player in a location near heat sources, or in a place subject
to direct sunlight, excessive dust or mechanical shock.
Operation
If the player is brought directly from a cold to a warm location, or is placed in
a very damp room, moisture may form on the lenses inside the player.
Should this occur, the player may not operate properly. In this case, remove
the disc and leave the player turned on for about an hour until the moisture
evaporates.
Cleaning
Clean the unit, panel and controls with a soft cloth slightly moistened with a
mild detergent solution. Do not use any type of abrasive pad, scouring powder
or solvent such as alcohol or benzine.
Power sources
The operating voltage is indicated on the nameplate at the cover of the player.
If you are not going to use the player for a long time, be sure to turn off the unit.