PXM PX184, Руководство пользователя

Страница: 19 / 25

13. RDM DESCRIPTION OF AVAILABLE PARAMETERS
The PX184 supports the RDM protocol. DMX protocol allows only of a one-way data
transmission, while its extension the RDM protocol can transmit information in two directions.
This makes possible to simultaneously send and receive information, and hence the possibility of
monitoring activities of the compatible devices. Thanks to RDM some available settings of
compatible devices may be programmed using this protocol.
Below there is a list of RDM parameters supported by PX184:
19
Parameter name PiD
Description
PARAMETER_DESCRIPTION 0x0051 description of additional parameters
DEVICE_INFO 0x0060 information concerning the device
SOFTWARE_VERSION_LABEL 0x00C0 firmware version of the device
DMX_START_ADDRESS * 0x00F0 DMX starting address of the device,
minimum value: 1, maximum value: 512.
According to the RDM standard, for device
whose footprint is 0, the value of this
parameter may be 65535 and then it is not
possible to change the initial address settings
for the entire device, but only for sub-devices.
IDENTIFY_DEVICE * 0x1000 device identification,
Two states are possible: identification is off
(0x00 value) and identification is on (0x01
value).
STATUS_MESSAGES 0x0030 information about device status
DEVICE_MODEL_
DESCRIPTION 0x0080 device description, e.g. name
MANUFACTURER_LABEL 0x0081 manufacturer description, e.g. name
DEVICE_LABEL * 0x0082 additional device description,
It is possible to enter an additional device
description using up to 32 ASCII characters.
DMX_PERSONALITY 0x00E0 DMX operational mode
DMX_PERSONALITY_
DESCRIPTION 0x00E1 description of individual operational modes
DEVICE_HOURS 0x0400 information concerning the working time of the
device counted in hours
TEMPERATURE_LIMIT_
ON/OFF 0x800E temperature limitation activation for the
temperature sensor connected to the driver,
For 0 value, the function is not active; for 1
value, the function is active. Default value is 1.