PXM DMX-DALI Converter, Руководство пользователя

Страница: 3 / 20

1
DMX-DALI Converter is an advanced video converter that allows in easy way to combine
dynamic light systems based on the DALI control and DMX-512 systems.
PX175 allows you to connect, in accordance with the standard DALI up to 64 DALI devices.
Device menu allows to independently address any individual lamps or groups of devices, and
user can create up to 16 groups. What is more for each of the lamp, you can define a number of
individual parameters such as minimum and maximum brightness of the lamp, the time in which
the brightness of the lamp reaches its maximum value (fade time), the amount of steps needed to
achieve maximum brightness level (fade rate) and determine the brightness of each lamp in case
of control system failure.
The PX175 allows also to select the response of the system on loss of DMX signal (either
complete exclusion, the full brightness of a static scene or a user-specified brightness).
The device is powered from 24V DC. It is produced in a housing with a width of 4 standard DIN rail
modules adapted for mounting on 35 mm wide DIN rails.
The PX175 is a device powered with safe voltage 24V,however during its installation and use the
following rules must be strictly observed:
1. Installation of the device should be carried out by a person with appropriate qualifications and
in accordance with this document.
2. The device may only be connected to 24V DC current (stabilized voltage) with current-
carrying load in accoradance with technical data.
3. Protect the power cord from any mechanical and thermal damage.
4. In case of any cord damage, replace it with a wire of the same technical data.
5. Connection of DMX signal can only be made with shielded conductor.
5. All repairs and connections of outputs or DMX signal can only be made with cut off power
supply.
6. The PX175 should be strictly protected against contact with water and other liquids.
7. All sudden shocks, particularly dropping, should be avoided.
8. The device cannot be turned on in places with humidity exceeding 90%.
9. . The device cannot be used in places with temperature lower than 2 ° C or higher than 40 ° C.
10. Clean it with dump duster only.
1. GENERAL DESCRIPTION
2. SAFETY CONDITIONS