PXM DMX-DALI Converter, Руководство пользователя

Страница: 16 / 20

4.9. MENU dAL Ind
4.9.1. Determining the DALI parameters for the individual ballast
To determine the DALI parameters for the individual ballast you need to:
select from the main menu then press ENTER. The display will show confirm with
ENTER. Using NEXT or PREV buttons to select the ballast ( ) and move to the DALI
parameter you want to or one of the groups and press ENTER. Select the desired value and
confirm.To make changes visible, go to the main menu by pressing ESC.
The DALI parameters for the individual ballasts are identical with those for setting the parameters
for all the ballast (see chapter 4.7.2.). If the lamp will be disconnected from the network converter
will report an error, when you would want to change the parameter value.
4.8.3. Adding / removing of all the ballast from the group
To add all of the ballasts to the group you should in the menu using NEXT or PREV buttons
choose the desired group number, for example, ( ) and press ENTER to accept. Then, set
the device to parameter using NEXT or PREV buttons on and then accept with ENTER.
All ballasts are members of the selected group.
To remove the ballast from the group, select the group number, press ENTER to accept.
All ballasts are removed from the selected group.
Then, set
the device to parameter using NEXT or PREV buttons on and then accept with ENTER.
4.9.2. Adding / removing individual ballast from the group
To add a lamp to a group, go to the menu by pressing ENTER, select the requested ballast
using the NEXT or PREV buttons. The selected lamp will light up. Accept that with ENTER. Then,
set using the NEXT or PREV buttons to the requested group number ( ) and press ENTER.
Set parameter to and accept with ENTER. The ballast is a member of a selected group.
Adding lamp to the new group does not exclude it from the previous group, so that a lamp can
belong to several groups.
To remove the ballast from the group, select the requested ballast and press ENTER, then select
the group number. Accept with ENTER. After that, set using NEXT or PREV buttons on
and then press ENTER. The ballast is removed from the selected group.
14