PXM DMX-DALI Converter, Руководство пользователя

Страница: 14 / 20

Maximum Level
range: 0-254
The highest brightness level of the lamp
0 - disabled
254 - 100% brightness
When it is set to a relatively lowlevel, DMX control will respond to the increase of the value to
some specified level.After crossing this parameter the further increase will not affect the behavior
of the lamp.
Lowest possible to set brightness level is depending on the manufacturer of ballast, you can
check it in the SSL parameter (see chapter 4.8.2.2.).
Reset
ballast reset
To reset the ballast you have to press ENTER when on the screen appears . After that
display will show , press ENTER to accept.
All these data are collected from DALI devices:
Status
range: 0-255
Indicates the decimal value of the device status
Lamp Cooperative
range: Yes | No
Indicates that the lamp is responding to messages
Lamp Failure
Range: Yes | No
Indicates a lamp defect message
Lamp Power ON
Range: Yes | No
Indicates whether a lamp was switched on
Lamp Error
Range: Yes | No
This determines if lamp reports an error or not.
4.8.2.2. Read-only messages
12