Panel Cutout
:
92 X 45 mm
Protection
:
IP54 Frontal
0
0
Range
:
-30.0 C to +50.0 C
0
Accuracy
:
+/-1 C
0
0
Storage temp
:
-20 C to 70 C(non-condensing)
2
<
2.5mm one wire/terminal only.
Data Storage :
Non-Volatile EEPROM Memory
Power Input
:
/-20%, 50Hz
Connection
:
Plugable Screw terminal blocks.
Dimensions
:
Front - 106.2 x 50 mm
Mounting
:
Flush panel mounting
Display
:
16x2 LCD
0
Resolution
:
0.5 C
0
0
Operating Temp
:
5 C to 50 C(non-condensing)
0
0
Probe Tolerance :
+/-0.3 C at 25 C
Input
:
NTC Probe, SZ-N75
Housing
:
ABS Plastic
All Relay
:
5A/250Vac
Depth- 59 mm
Technical Data
12
NC-110A
Disable
Enable
Disable
Sr.No.
Parameter
(LCD Message)
Description of parameters and functions.
Parameter setting
method.
11
FACTORY SET
SET - EXIT
UP/DOWN - SCROLL
Use UP/DOWN keys to set desired
range.
To restore default settings of the
controller. When set to Enable, all
parameters are programmed to factory
settings. Used to debug setting related
problems.
Once the SET key is pressed the control
goes into the normal mode and displays
the temperature.
21
22
Function: Revert to factory set
parameter.
Function : To end programming
Range
Min
Max
Fact. Set
press the set key.
To change the parameter,
To end Program mode press
set key.
KEYPAD LOCK
Use UP/DOWN keys to set desired
range.
Enable = all parameters are locked to
set values.
Disable= Use can change the values.
20
Function: To lock keypad.
Range
Min
Max
Fact. Set
To change the parameter,
press the set key.
Disable
Enable
Disable
Key Introduction :
NC-110A
Key
Description
Press for 4 seconds to reset HP, LP, AFT faults in manual reset.
Used in program mode and set mode to increment parameter
value.
prb
Used to view to Antifreeze (AFT) Temperature.
Used to enter into the program mode.
Used in program mode and set mode to decrement parameter
value.
In program mode and set mode used to set the changed value
of parameter or to enter into set mode.
