4. Have all passengers leave the boat.
5. Estimate how much fuel is needed.
6. Using the special key provided for this purpose, insert
the key into the slot in the fuel fill, turn the key
counterclockwise, and remove the cap.
BE SURE THAT THE FUEL FILL IS IN CONTACT WITH
THE FUEL NOZZLE TO PREVENT ANY STATIC
SPARKS DURING THE FUELING OPERATION.
To prevent damage to your fuel system, use only a
good grade of fuel as recommended by the engine
manufacturer. Do not use a fuel which contains harsh
additives or alcohol. Damage done to your fuel
system as a result of using these fuels will not be
covered by your warranty.
7. Insert the fuel nozzle into the fuel fill and dispense the
fuel until the tank is full. Verify that the tank is full by
reading the fuel gauge and/or by the sound of the fuel
fill port. If your tank takes significantly more fuel than
expected, investigate the cause immediately.
BE CAREFUL TO NOT SPILL ANY FUEL ON THE BOAT.
IF YOU DO, BE SURE TO CLEAN UP ANY SPILLED
FUEL IMMEDIATELY WITH A DISPOSABLE CLOTH.
8. Remove the nozzle and replace the fuel fill cap. Tighten
securely with the provided key.
CAUTION
WARNING
WARNING
OPERATING YOUR BOAT
WHEN ARRIVING AT YOUR BOAT
3000 Offshore Express
3-3
Содержание 3000 OFFSHORE EXPRESS
