YA
LI D
IG
IT
A
L, P
A
R
A
D
A
, R
A
M
O
, I
N
ST
A
LL
AT
IO
N A
N
D O
PE
R
AT
IN
G M
A
N
U
A
L
20
16
-02
-0
1
YA
LI D
IG
IT
A
L, P
A
R
A
D
A
, R
A
M
O
, I
N
ST
A
LL
AT
IO
N A
N
D O
PE
R
AT
IN
G M
A
N
U
A
L
20
16
-02
-0
1
71
|
GB
GENERAL
INFORMATION
7. TECHNICAL
CHARACTERISTICS
10
SOFTWARE VERSION
Displays the software version of the digital thermostat.
11
SLA: MASTER/SLAVE SET-UP
Press “
OK
” to enter this parameter. Select with “
+
”
or “
-
“ and validate by pressing “
OK
” :
NO
: radiator control active.
YES
: radiator will function as slave radiator and follow
the controls instructions of the master radiator.
12
END: EXIT THE PARAMETER MENU
Press the “
OK
” key to exit installation parameter menu
and return to normal operation.
5. MAINTENANCE,
REPAIR AND DISPOSAL
•
WARNING
: Disconnect electrical supply before carrying
out any maintenance activity.
• The product should be cleaned using a soft damp cloth.
Do NOT use chemical or abrasive cleaners as they will
damage the surface finish.
• The radiator is equipped with overheat protection that
cannot be reset (melt fuse). This overheat protection
disconnects the current if the radiator becomes too hot
(e.g. when covered).
• If the supply cord is damaged, it must be replaced by the
manufacturer, a service agent or similar qualified persons
in order to avoid a hazard.
• The radiator is filled with an exact amount of
environmental friendly vegetable oil. Any repairs that
require the radiator to be opened shall therefore only be
carried out by the manufacturer or an approved agent.
• In case of leakage contact the manufacturer or service agent.
• When the radiator reaches the end of its service life
follow the regulations concerning the disposal of oil.
6. WARRANTY
The product is covered by a 10 years warranty except
for the electrical and electronic components that are
covered by a 2 year warranty.
MEASURING ACCURACY
0.1°C
ENVIRONMENTAL:
- Operating temperature
- Storage temperature
-30°C to +50°C
-30°C to +70°C
SETTING TEMPERATURE RANGE
- Comfort mode
- Reduced mode
- Frost protection mode
+5.5°C to +30.0°C, must be
higher than the reduced
mode setting.
+5.0°C to +19.0°C, must
be lower than the comfort
mode setting.
+0.5°C to +10.0°C.
ELECTRICAL INSULATION
Class I
ELECTRICAL PROTECTION
• IP21 when installed with
standard connection box.
• IP 44 when installed with
connection box with
splash proof cover.
• IP 44 when fitted with a
2-pin Schuko plug (YALI D
P models only).
POWER SUPPLY
230 VAC – 50 Hz or 400
VAC - 50 Hz according to the
product rating label.
DIRECTIVES & STANDARDS:
The product has been designed
to comply with the following
Directives and Standards.
• EN 60730-1
• EN 60335-1
• EN 60335-2-30
• EN 62233
• EN 55014-1
• EN 55014-2
• EN 61000-3-2
• EN 61000-3-3
• EN 60529
• LV Directive 2006/95/EC
• EMC Directive 2004/108/EC
• R&TTE Directive 1999/5/EC
• RoHS Directive 2002/95/E
