Puricom 970213, Руководство пользователя

Страница: 20 / 64

Español
English
8
• Fill the water tank of the hydrogenator jar.
On this purpose:
- Open the cap located in the base of the jar by turning
it anti-clockwise. There may be water rests in the tank.
This means it has been examined.
- Fill the tank.
- Fill the lower tank of the jar with filtered and dechlo-
rinated or osmosis water. Add 60 cm3 ( ) if
the sponge inside the tank is already soaked or 120 cm3
( ) if it is dry.
- Close the cap by turning it clockwise.
• Do not attempt to disassemble, repair or modify the
equipment in an arbitrary manner after a failure. Repair
must be carried out by trained staff (7).
7
• Do not leave cigarettes or products with flame on the
equipment, since they may cause a fire (8).
• Do not touch the electrodes with sharp or pointed objects.
• When using the equipment for the first time, bubbles
from the electrodes may differ from their normal size. Size
will go back to normal after 2 or 3 hours.
• Do not use the equipment continuously for more than 1
hour. This could overload the electrodes and damage them.
It is recommended to have a rest period of at least 10 minu-
tes for each hour of use.
5.3. MAINTENANCE WARNINGS
• Unplug the equipment from the electrical grid to clean
it. Clean the electronic base and the outer side of the jar
with a dry cloth. Do not use water, alcohol, paint remo-
ver, benzene or any other chemical product.
To clean and sanitize the jar, see section
9. MAINTE-
NANCE AND CLEANING of this manual.
6. INSTALLATION AND START-UP
• Plug the transformer into the electric outlet and con-
nect the other end to the power connection of the equi-
pment located behind it.
8