Puretec Tripla Z1-T1, Руководство пользователя

Страница: 6 / 24

6 Installation & Operation Manual Copyright © Puretec Pty Ltd 2021
Mixer Tap Assembly
Step 4. Place the retainer screw
through the hole in each spacer and
screw to the hole on the bottom of
the faucet.
Then, use a wrench to lock the
locking nut.
Rubber Spacer
Locking
Nut
Retainer Screw
Zinc Spacer
Fig. 2 - Tap Assembly
O-Ring
Brass Base
1
2
Step 1.
Connect the hoses to the
faucet and tighten them. Refer to
page 7 for connection patterns.
Only use hand to screw the flexible
hose. Do not over tighten. Don't use
any tools.
Step 2. Put brass base with o-ring to
the bottom of the faucet.
Basin or Sink
33mm dia.
Hole
Step 3. Put the hoses through the
basin or sink. Required through hole
size is Ø33mm.
3
4